Kenwood GE940 YouTube

Kenwood 940. Kenwood DP940 CD Players It transmits on the amateur radio bands from 160 to 10 meters including the WARC bands and is also a general coverage receiver from 150 kHz to 30 MHz Dynamic range of 102 dB, SSB slope tune, 600Hz to 2400Hz CW variable bandwidth, IF notch

Kenwood Ts 940 Serial Numbers powenta
Kenwood Ts 940 Serial Numbers powenta from powenta.weebly.com

The Kenwood TS-940S is a serious radio for the serious operator Its modes of operation are CW, SSB, AM, FSK, and narrow-band FM

Kenwood Ts 940 Serial Numbers powenta

The '940 was a capable, fully featured rig and it made a lasting. He bought a second-hand rig in the early 90s, previously having used a TS-440SAT for most of his HF operating 40 regular in 4 banks 4 program scan pairs RAM storage with battery backup Repeater shift / offset: No dedicated, use VFO A/B split instead Power supply: Mains: 120 / 220 / 240 VAC (3-pin IEC C14 connector) Current drain / power consumption: RX: 80 W TX: Max 510 W Antenna impedance / connector: 50 ohm (20-150 ohm with AT-940) / SO-239.

Kenwood TS940S 7135238006 oficjalne archiwum allegro. It features continuous tuning steps, and optional filters of 250 / 500 Hz CW, and 6 kHz AM. The '940 was a capable, fully featured rig and it made a lasting.

Kenwood Ts 940 Serial Numbers powenta. 40 regular in 4 banks 4 program scan pairs RAM storage with battery backup Repeater shift / offset: No dedicated, use VFO A/B split instead Power supply: Mains: 120 / 220 / 240 VAC (3-pin IEC C14 connector) Current drain / power consumption: RX: 80 W TX: Max 510 W Antenna impedance / connector: 50 ohm (20-150 ohm with AT-940) / SO-239. As shown in the Frequency Allocation Chart, above figure, broadcast and Amateur radio station frequencies are allo- cated in specific bands expressed in megahertz (MHz) or wavelength in meters (m).